LOBSTER CLAWS
ITEM NO. DESCRIPTION
#LC - * - ST available from 9 to 16 mm; sterling silver, with ring - also available
with no ring
#LC - C9R - ST pear shaped claw; 9mm, with ring, sterling silver
#LC - C11R - ST pear shaped claw; 11mm, with ring, sterling silver
#LC - C13R - ST pear shaped claw; 13mm, with ring, sterling silver
#LC - 10M/W lobster claw with ring, white metal, 10mm
#LC - 13M/W lobster claw with ring, white metal, 13mm
#LC - 15M/W lobster claw with ring, white metal, 15mm
#LC - C9M/BR lobster claw with ring, brass, 9mm
#LC - C13M/LF lobster claw with ring, brass, 13mm
#LC - C15M/LF lobster claw with ring, brass, 15mm
BAILS
ITEM NO.
BA - BR235D9
BA - 65/BR
BA - 67/BR
CHAIN TAGS
ITEM NO. DESCRIPTION
TG - C11/BR 11mm brass chain tag
TG - C12/BR 12mm brass chain tag
TG - C13/BR 13mm brass chain tag
FOLDOVER CLASPS
ITEM NO. DESCRIPTION
FC - 675/BR BRASS FOLD OVER CLASP
OTHER CLASPS AVAILABLE UPON REQUEST.
SPRING RINGS
ITEM NO. DESCRIPTION
SR - 6M/BR 6MM; BRASS
SR - 7M/BR 7MM; BRASS
SR - 7M/NP 7MM; NICKEL PLATE
JUMP RINGS
Minimum of 1000 pieces
ITEM NO. DESCRIPTION
#JR - 3.7 - ST 3.7mm
#JR - 4.3 - ST 4.3mm
#JR - 5.8 - ST 5.8mm
#JR - 6.0 - ST 6.0mm
#JR - 8.1 - ST 8.1mm
SPLIT RINGS
Minimum of 1000 pieces
ITEM NO. DESCRIPTION
#SI - 4.5M - ST 4.5mm
#SI - 5M - ST 5mm
#SI - 6M - ST 6mm
#SI - 7M - ST 7mm
#SI - 8M - ST 8mm
PLATING SLEEVES
Our plating sleeves hug the post securely - preventing contamination and blackening
of the earring post. Easy to slide on and remove, they are quick and efficient
to use. And, because we use only quallity materials, these sleeves are safe
to use time after time.
ITEM NO. DESCRIPTION
RS12R (1/2" Red)
RS12B (1/2" Blue)
RS58R (5/8" Red)
RS58B (5/8" Blue)
LABOR SAVING CARDING MACHINES
Automation is the key to competitiveness. Our labor-saving carding machines
can help you minimize costly manual labor and increase the productivity of your
carding department - by over 50%. This let you free key employees for other
operations such as packaging, wrapping increasing your firm's overall capacity.
Our carding machines automatically deliver and hold each clutch for easy insertion of the earring post by the operator. Angled arms then push the clutch to the base of the post, insuring a tight card every time.
These machines work to eliminate the most tedious and time-consuming part of the carding process - picking up and orienting the clutch. And by eliminating pinched and sore fingers associated with hand carding, you can increase the quality and consistency of each earring that is carded.
YY - DA02 butterly clutch feeder
YY - DA07 bullet clutch feeder
YY - DA10 comfort disc clutch feeder
YY - DA12 isolator clutch feeder
YY - DA14 military clutch feeder